The exhaust system collects the engine cylinders and then the gases are transported to the catalytic converter through the exhaust pipe. Cars with all cylinders have an exhaust manifold.
The exhaust system can crack or deformed the excessive heat of the engine. If the exhaust escapes from the places it has not done before the exhaust manifold may have to be replaced. Most of the time the seals between the collector and the motor block must be replaced when repairing an exhaust manifold. You can also buy Holden Commodore VE & VF exhaust system for Sale online at Black Ops Performance.
For the repair of an exhaust manifold, follow this guide:
First, look for the exhaust manifold on the car, find the exhaust silencer and driving under the car and trace it where it attaches to the exhaust manifold. Remove the bolts that connect the exhaust pipes to the exhaust manifold outlet.
A half-walled inch wrench driver is required to loosen the bolts. After removing them, the joints must be checked and replaced if necessary. Remove the bolts that secure the collector to the engine block. Remove the exhaust manifold and the motor seal with care. After that, reinstall the exhaust pipe at the manifold outlet, the replacement the seal.
To replace an exhaust pipe, follow this guide:
First, detach and remove bolts that secure the exhaust pipe to the exhaust manifold. Then loosen and hangers remove holding the exhaust pipe to the under the car by ensuring that it will not fall.
Now replace the exhaust pipes and reconnect to the system. If you replace the exhaust pot, catalytic converter, or resonator, and then do it by replacing the pipes. This is a job that deserves treatment once completed.